MIC REAR Another connector for the microphone.
Radioboss micro 2 way radio user manual Pc#
USB1 CONNECTOR For connecting the PC and communication with the Panel application. PADDLE Connector for pedal for the built in WinKey. PTT IN CONNECTORS Inputs for radio A and radio B PTT signals. FSK CONNECTORS For connecting foot switches for radio A and B. Can be configured to output GND or +12VDC with jumpers as well, and also have the maximum current of 2A. PTT DLY PTT DLY1 and PTT DLY2 are PTT outputs with programmable delay. Using jumpers inside the device, you can configure the outputs to be GND or +12VDC, with maximum current of 2A. PTT OUT PTT OUT1 and PTT OUT2 are PTT outputs with no delay. LAN CONNECTOR For the LAN network, standard Ethernet cable. If you have a 6000 Series FlexRadio this jack will be unused, and it will use the LAN connection from the USB panel program. MIC CONNECTOR Used for connecting the operators microphone.ģ REAR PANEL OVERVIEW IG-M Rear Panel CAT CONNECTOR For connecting the CAT from the radio. PHONO CONNECTOR Used for connecting the operators headphones. RX A and RX B POT Used for setting the audio levels recorded from radio A and radio B. IGM uses the latest generation WinKey V3.0. CW POT The CW POT is used to change the CW speed of the built in CW keyer. LED PANEL The LED PANEL intuitively displays headphone audio distribution in SO2R mode, as well as PTT for both radios. Besides settings, the keyboard can be used for SO2R mode and switching between SO2R and MODEM mode. FRONT PANEL OVERVIEW IG-M Front Panel MENU KEYBOARD IG-M is designed to be easy to use and most settings can be done without the need for a computer, using the MENU KEYBOARD on the front panel. It is designed to be controlled by a Windows application, and can be used stand alone as well.
Radioboss micro 2 way radio user manual manual#
1 Interface Genius Modem Instruction Manual v1.2.4Ģ Interface Genius Modem is a USB / LAN controlled SO2R radio interface remote radio modem.
0 kommentar(er)
